Angle Mount Brush Seals In Stock

The first number of the three digits (X--) is the thickness size of the brush. The last two numbers (-XX) is the angle of the holder. The chart shows the available "Mounting Holders" and "Bristle Lengths".

230 240	Mounting Holders
	A°	L	W	H	T	-	CODE
	30°	.75	.23	.23	.045	mill alu	230.75
	40°	.50	.23	.24	.045	mill alu	240.50
	B (Brush Lengths)
	.41	.50	.63	.81	1.00	1.25	1.50
	2.00	3.00	-	-	-	-	-

A35	Mounting Holders
	A°	L	W	H	T	-	CODE
	35°	.45	.23	.24	.045	mill alu	A35.45
	B (Brush Lengths)
	.41	.50	.63	.81	1.00	1.25	1.50
	2.00	3.00	-	-	-	-	-

340	Mounting Holders
	A°	L	W	H	T	-	CODE
	40°	1.18	.26	.26	.062	mill alu	3401.1
	B (Brush Lengths)
	.66	1.00	1.50	2.00	-	-	-

445	Mounting Holders
	A°	L	W	H	T	-	CODE
	45°	.98	.30	.31	.050	mill alu	445.98
	B (Brush Lengths)
	.63	1.00	1.25	1.50	1.75	2.00	3.00

545	Mounting Holders
	A°	L	W	H	T	-	CODE
	45°	.88	.44	.52	.055	mill alu	545.88
	B (Brush Lengths)
	1.00	1.50	1.75	2.00	2.50	3.00	3.25
	4.00	4.50	-	-	-	-	-

745	Mounting Holders
	A°	L	W	H	T	-	CODE
	45°	1.43	.52	.44	.055	mill alu	745.14
	B (Brush Lengths)
	1.15	1.75	2.00	2.25	3.00	4.00	5.00
	6.00	7.00	8.00	-	-	-	-

845	Mounting Holders
	A°	L	W	H	T	-	CODE
	45°	1.36	.47	.59	.055	mill alu	8451.3
	B (Brush Lengths)
	1.00	1.50	1.75	2.00	3.00	3.50	4.00
	5.50	7.00	8.50	11.50	13.50	14.50	17.50

Generally the bristle is Nylon, some sizes are availble with Stainless Steel, Carbon Steel, Natural or other bristle materials. Additional bristle lengths and services are available.

METAL STRIP BRUSH - CHANNEL SIZES					Formed Size
STRIP CODE	FLAT STRIP SIZE		FORMED SIZE
NUMBER	WIDTH	THICKNESS	"B" BASE	"L" LEG
2 x x	.250"	.020"	.100"	.105"
3 x x	.375"	.024"	.147"	.148"
4 x x	.500"	.030"	.186"	.202"
5 x x	.625"	.035"	.230"	.254"
7 x x	.825"	.040"	.297"	.350"
8 x x	1"	.040"	.312"	.411"

Other Brush Seal Mountings

		 
Straight Mount
0 Degree
		 
Right Angle
90 Degrees
    
Reverse Angled
40 and 45 Degrees

Have questions, need help? Contact Us!